Condensation Container - Siemens WT48XEH9GB User Manual And Installation Instructions

Table of Contents

Advertisement

Open the fluff collector and re-
5.
move any fluff.
Clean the filter thoroughly under
6.
running water and then dry it off.
You can remove heavy soiling
carefully with a soft brush.
You must not damage or remove
the fluff collector's seal.
You can clean the fluff collector in
the dishwasher.
Close the fluff collector until the
7.
tab engages.
Slide the fluff collector in horizont-
8.
ally as far as it will go.
Close the base unit → Page 56.
9.
12.12 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Note: Operate this appliance using
the water drain hose provided. If you
connect the water drain hose
→ Page 14, you do not have to regu-
larly empty the condensation con-
tainer → Page 39.
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡ The display shows the following
after drying: "Finished, remove
washing"
¡ or during operation: "Please empty
condensate container".
operation en
39

Advertisement

Table of Contents
loading

Table of Contents