Connecting The Appliance To The Home Connect App; Activating Wi-Fi On The Appliance; Deactivating Wi-Fi On The Appliance; Resetting The Appliance Network Settings - Siemens WT48XEH9GB User Manual And Installation Instructions

en Home Connect
In the Home Connect app, enter
7.
the network name (SSID) and
password (key) for your home net-
work.
Carry out the steps in the
8.
Home Connect app to connect the
appliance.
a If the display shows "Connected"
and lights up permanently, the
appliance is connected to the Wi-Fi
home network.
Connect the appliance to the
9.
Home Connect app → Page 46.
16.3 Connecting the appli-
ance to the Home Con-
nect app
Requirements
¡ The appliance is connected to the
WLAN home network (Wi-Fi).
¡ The Home Connect app is open
and you have logged on.
Select Connect to the app.
1.
Select Connect app.
2.
Confirm the message in the dis-
3.
play.
a The appliance connects to the
Home Connect app.
Once your appliance is displayed
4.
in the Home Connect app, carry
out the last steps in the
Home Connect app.
a If the display shows "Connected",
the appliance is connected to the
Home Connect app.
16.4 Activating Wi-Fi on the
appliance
Note: When Wi-Fi is activated, the en-
ergy consumption increases in com-
parison to the values specified in the
consumption value table.
Press and hold Remote Start
1.
approx. 3 seconds.
46
Select Wi-Fi on/off.
2.
Select on.
3.
a Wi-Fi is activated.
Note: If Wi-Fi is activated, the appli-
ance will not switch itself off automat-
ically.
16.5 Deactivating Wi-Fi on the
appliance
Press and hold Remote Start
1.
at least 3 seconds.
Select Wi-Fi on/off.
2.
Select off.
3.
a Wi-Fi is deactivated
Note: The connection is automatically
re-established when the Wi-Fi is
switched back on.
16.6 Resetting the appliance
network settings
Press and hold Remote Start
1.
at least 3 seconds.
Select Network settings.
2.
Select Reset.
3.
a The network settings are reset.
16.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Activating remote start
Notes
¡ Remote start is deactivated for
safety reasons in the following
circumstances:
– Open the appliance door.
– Press Start/Reload .
– Press Remote Start
– Switch off the appliance.
– Following a power cut.
for
for
for
.