Table of Contents
Advertisement
en operation
Close the two fluff filters and put
9.
them together.
Insert the two-part fluff filter.
10.
Close the door.
11.
12.10 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Note: Operate this appliance using
the water drain hose provided. If you
connect the water drain hose
→ Page 14, you do not have to regu-
larly empty the condensation con-
tainer → Page 32.
32
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡ The display shows the following
after drying: "End"
¡ or the display shows the following
during operation:
Pull out the condensation con-
1.
tainer, keeping it level.
Empty the condensation container.
2.
Check the condensation container
filter → Page 43 regularly and
clean the filter if it is dirty.
Make sure that you insert the con-
densation container before operat-
ing the appliance.
→ "Inserting the condensation con-
tainer", Page 33
.
Advertisement
Table of Contents
