Table of Contents
Advertisement
en Appliance care
Insert the plug from below.
2.
a The condensation container is
ready for the appliance care pro-
gramme.
Note: If the condensation is drained
using the drain hose, perform the
above-mentioned steps after the ba-
sic or intensive appliance care pro-
gramme in the reverse order.
18.3 Starting the appliance
care programme
Requirements
¡ The appliance is ready to run the
appliance care programme.
→ "Preparing the appliance for the
appliance care programme ",
Page 49.
¡ The condensation container is
ready for the appliance care pro-
gramme.
→ "Preparing the condensation
container for the appliance care
programme", Page 49.
Press
.
1.
The switch-on process takes a few
seconds.
50
Set the programme to position 1.
2.
Press and hold Basic Settings 3
3.
sec..
Set the programme to position 4.
4.
Release Basic Settings 3 sec..
5.
a "Basic machine care" and the pro-
gramme duration alternate on the
display.
18.4 Running the basic appli-
ance care programme on
the appliance
To remove any light soiling, you can
run a basic appliance care pro-
gramme.
Note: After a certain period of use,
the appliance automatically recom-
mends that you run the basic appli-
ance care programme. Before the
start and end of the programme, the
display shows the note "Basic ma-
chine care required" for 5 seconds.
The note is shown repeatedly until
the basic appliance care programme
has been run completely.
Advertisement
Table of Contents
