Drawing On A Projected Image (Built-In Annotation Mode) - Epson V11H998520 User Manual

Drawing on a Projected Image (Built-in Annotation Mode)

You can project from a computer, tablet, video device, or other source and annotate over your projected
content using the interactive pens or your finger. You can use one pen, both pens at the same time, or a
combination of pens and finger touch.
Note: A Touch Unit is optional and must be installed for finger touch operation.
1. Project an image from a connected device.
You see the toolbar on the bottom of the projected image.
2. To move the toolbar to the right, left, top, or bottom of the screen, use the pen or your finger to drag it
to the desired location.
3. To switch to one of the other interactive modes, do one of the following:
• To split the screen with whiteboard mode, select the
• To switch to PC Interactive mode, switch to the input source for the connected computer or select
the
computer is already connected.
4. To show or hide the toolbar, select the
Note: You can also show or hide the projector control toolbar by setting the Interactive > Display
Toolbars setting to Always Show or Hide for Set Time.
PC Interactivity icon on the toolbar and make sure it is set to On if the
icon.
187
Whiteboard icon on the toolbar.