Installing the Additional Wireless LAN Module
To use the additional wireless connections, install the optional Epson 802.11b/g/n wireless module in the
projector.Your projector has a built-in wireless LAN module. If you install an optional Epson 802.11b/g/n
wireless LAN module, you can use both network connection methods at the same time. When you install
the wireless LAN module, set the Simple AP setting to On. Do not install any other type of wireless
module.
Caution: Never remove the module while its indicator light is blue or flashing, or while you are projecting
wirelessly. You may damage the module or lose data.
Note: The wireless LAN module is not included with your projector.
1. Turn off the projector and unplug the power cord.
2. Loosen the screw securing the LAN module cover and lift off the cover, if it is attached.
59