Controlling The Volume With The Volume Buttons; Selecting A Quick Startup Setting - Epson V11H998520 User Manual

• High Speed to adjust brightness as soon as the scene changes.
5. Press Menu or Esc to exit the menus.
Parent topic:

Controlling the Volume with the Volume Buttons

You can use the Volume buttons on the remote control to adjust the volume of your projected content.
The volume buttons control the projector's internal speaker system or any external speakers you
connected to the projector.
You must adjust the volume separately for each connected input source.
1. Turn on the projector and start a presentation that includes audio.
2. To lower or raise the volume, press the Volume buttons on the remote control.
A volume gauge appears on the screen.
3. To set the volume to a specific level for an input source, use the projector menus.
Parent topic:

Selecting a Quick Startup Setting

If you want to quickly restart the projector within five seconds after turning it off, you can change the
Quick Startup setting. You can select 20, 60, or 90 minutes of Quick Startup time.
Note: The projector may take longer than five seconds to start up in the following conditions:
• When projecting from the one of the projector's USB ports
• When projecting with Screen Mirroring
• If whiteboard sharing was terminated in the previous session
• If you want to restore the whiteboard contents from the previous session
Using Basic Projector Features
Using Basic Projector Features
141