3. To close the main toolbar, select the
Note: If you want to hide the toolbar automatically after drawing, select the
the toolbar.
4. To show or hide the projector control toolbar, select the
Note: You can also show or hide the projector control toolbar by setting the Extended > Display >
Projector Control setting to On or Off.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Drawing on a Projected Image (Built-in Annotation Mode)
You can project from a computer, tablet, video device, or other source and annotate over your projected
content using the interactive pens or your finger. You can use one pen, both pens at the same time, or a
combination of pens and finger touch.
1. Project an image from a connected device.
2. Hover near or tap the board or projected image with the interactive pen or your finger. Tap the
built-in annotation mode icon on the toolbar.
Interactive Modes
icon at the bottom of the toolbar.
or
167
icon at the bottom of
arrow.