Solutions When "No Signal" Message Appears - Epson V11H998520 User Manual

• Make sure you are using the most recent version of the USB Display software. You can download the
latest version from the Epson web site. Go to
or latin.epson.com/support
Parent topic:
Related references
Input Signal Settings - Signal I/O Menu
Related tasks
Selecting an Image Source
Connecting to a Computer for USB Video and Audio

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:
• Press the Source Search button and wait a few seconds for an image to appear.
• Turn on the connected computer or video source, and press its play button to begin your presentation,
if necessary.
• Check the connection from the projector to your video sources.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• If necessary, turn the projector and the connected computer or video source off and then on again.
• If you are projecting from an HDMI source, replace the HDMI cable with a shorter one.
• Connect the video source directly to the projector.
• Try a different video cable.
• If the other solutions do not solve the problem, reset all of the projector settings using the options on
the Initial/All Settings menu.
Displaying From a PC Laptop
Displaying From a Mac Laptop
Parent topic:
Related tasks
Selecting an Image Source
Connecting to an External Computer Monitor
Related topics
Connecting to Computer Sources
(Caribbean) and select your projector.
Solving Image or Sound Problems
Solving Image or Sound Problems
epson.com/support (U.S.),
309
epson.ca/support (Canada),