Adaptive Micro Systems FAST 350 User Manual page 9

Violator Alert 3: RB - Red and Blue flashing lights (Optional Feature)**
Check your packing slip or order to verify that this optional feature has been included
with your product. If this feature was ordered, the display will now show "RB" which
effectively flashes the Red and Blue flashing light pattern at the driver while displaying
their speed. The operator has 5 seconds to start pushing the button in order to change
the number setting. Note: You can set the numbers even when the "Red & Blues" are
flashing. Press the button until the desired speed setting is reached. Once the desired
setting is reached, stop and wait for the next screen after approximately 5 seconds.
Violator Alert 4: FL - Flashing Speed
The display will now show "FL". When drivers go over this setting, they will see their
over-the-limit speed flash. The operator has 5 seconds to start pushing the button in
order to change the speed setting. Press the button until the desired speed setting is
reached. Once reached, stop and wait for the next screen to appear after
approximately 5 seconds.
Violator Alert 5: BL - Blanking Speed
The display will show "BL" which is the speed limit that the display will no longer show
the oncoming vehicles speed. This setting will prevent drivers from increasing their
speed over this speed limit to see how fast they can go. Press the button until the
desired speed setting is reached. Wait approximately 5 seconds and the sign will go
dark. The display is now in service and operating in "Violator Alerts" mode.
Adaptive Micro Systems LLC | 7840 North 86th Street | Milwaukee, WI 53224
"Slow Down" Message
"Slow Down" // "Red & Blues"
"Flashing Speed"
Phone (800) 558-7022 | AdaptiveDisplays.com