Table of Contents
Advertisement
Timer is enabled, (see Section 11 "Setting the Clock and Timed Events) the sign will run
in Violator Mode (or any other mode) only during the selected event timed program.
Otherwise, if the timer is disabled, the sign will run continuously (not recommended for
overly long periods of time when on battery power only).
Violator Alert 1: MS - Minimum Speed
After seeing the "VA" screen, the display will show "MS" (see photo below) along with a
number. The number represents the lowest speed at which the display will start
showing all oncoming vehicles. When this number appears, the operator has 5 seconds
within to start pushing the button in order to program this "MS" speed setting. Press the
button until the desired speed setting is reached. (Note: If the button is held down, the
numbers will increment fast without having to press the button many times. The
numbers will start over after 99 if you miss your desired speed without turning off the
power. If using the key chain remote, simply press either button to move the numbers
forward or backward). Once the desired setting is reached, stop and wait for the next
screen to appear after approximately 5 seconds. The screen will then change to the next
screen for speed setting.
Violator Alert 2: SL - SLOW DOWN (Optional Feature)**
Check your packing slip or order to verify that this optional feature has been included
with your product. If this feature was ordered, the display will now show the red
"SL" (Slow Down) message and show a speed setting number. The red "Slow Down"
message is effective in helping to calm traffic. When the operator sees the setting number
appear, push the button within 5 seconds in order to change this number until the
desired speed setting is reached. Note: You can set the numbers even when the words
"Slow Down" are flashing. Once the desired setting is reached, stop pressing the button
and wait for the next screen, after approximately 5 seconds.
Adaptive Micro Systems LLC | 7840 North 86th Street | Milwaukee, WI 53224
"Violator Alert"
"Minimum Speed"
Phone (800) 558-7022 | AdaptiveDisplays.com
Advertisement
Table of Contents
