Options And Upgrades; Warranty; Trouble Shooting Tips - Adaptive Micro Systems FAST 350 User Manual

13. OPTIONS and UPGRADES

-
-
-
-
-

14. WARRANTY

RU2 Systems warrants parts and workmanship on the LED display for (5) years. The
radar unit is warranted by the manufacturer for 2 years. On-site labor is not included.
Parts are repaired within five business days of receipt, and include ground service
shipping (within the U.S. only). Warranty does not include physical damage from
misuse, acts of nature, terrorism or vandalism. Wear and tear items such as tires are not
covered. Please forward any warranty issues to the Shipping Address found in Section 16.
Please call for authorized RMA before returning any parts.

15. TROUBLE SHOOTING TIPS

1. If no speed is displayed:
a) Check power and/or battery(s), if applicable. Battery(s) should be outputting
b) On solar powered units - check solar regulator indicator lights, if applicable.
c) Check your "Set Time" feature and be sure your clock is set properly to
d) Make sure sign is not set in "ND" – No Display mode.
2. If a "NR" is displayed:
Please note the radar can be accessed via a panel on the back side of the LED display.
Use the "L" key to remove the tamper resistant screws and slide the cover over.
a) Check the radar gun connector to be sure of a good connection.
b) Check the indicator light on the back of the radar unit:
Adaptive Micro Systems LLC | 7840 North 86th Street | Milwaukee, WI 53224
Powder coat finish in a variety of colors
RU2 Traffic Count Data Acquisition System with software
Solar Energy Package w/Panel, charger, and mounting bracket
"SLOW DOWN" violator alert
Red-Blue flashing bars violator alert
at least 12 volts.
Check the power to the charger from your solar panel and power out from
the regulator to the battery measures higher than 12 volts. If solar panel is
shaded, batteries may fail prematurely and/or sign will not operate
continuously.
display at the correct times. If in doubt, disable the set time feature.
• A solid red LED indicates a vehicle traveling away from the unit is
being measured.
• A solid Green LED indicates a vehicle traveling towards the unit is
being measured.
• A flashing red LED indicates power but no target is being acquired.
Phone (800) 558-7022 | AdaptiveDisplays.com