Table of Contents
Advertisement
Section D – Optional Data Recording System
1) Record Data:
A) When powered on, the data recorder's LCD screen will display the "Main Menu" similar
to Figure 1, below. Check the time and date listed.
1. If the time needs to be corrected, see Section 3 below.
2. If the time is correct, insert the SD (Serial Data) card into the small slot located on
the right side of the Data Recorder until it locks.
2) Retrieving Data:
a)
When you have finished collecting traffic data, hold any key and the display will
read "Remove SD Card".
b)
To remove the card, press the SD card in and it will pop out.
3) Setting the Date and Time:
a)
Before inserting the SD card, first power up as described above. Next, press "Enter" to
get to the Settings Menu, Figure 2.
b)
Press "Enter" when the display reads "Set Time".
Adaptive Micro Systems LLC | 7840 North 86th Street | Milwaukee, WI 53224
Quick Start Guide – Data Recording Unit
Figure 1 – Main Menu
Figure 2 – Set Time
Phone (800) 558-7022 | AdaptiveDisplays.com
Advertisement
Table of Contents
