Adaptive Micro Systems FAST 350 User Manual page 20

Pole mount radar speed display sign
Table of Contents

Advertisement

1.RU2". It will automatically rename the files up to "MMDDYY-9.RU2". When 10 such
automatically renamed files are already present, you will get an error message.
To input a new file name, press the "Enter" key at the Your File Name screen. Use
the + and – keys to select the characters and press "Enter". The cursor will move
to the next space. Once all (8) characters are entered, the screen will read
"Custom File Name Successfully Set", then the screen goes back to the Return to
Main Menu - + Enter screen. Press "Enter" to return to the main screen.
• Format SD Card - Erasing data on the SD card can be done while the data recorder is
mounted inside the trailer enclosure. This feature is used to delete any existing files on
the SD card. Press the Enter button to use this feature. The display will read "Insert card
(– to cancel)". To erase the card, insert the card into the memory slot located on the
right side of the data recorder. When it's finished, the display will read "Format Done,
Remove Card". The SD card must now be removed to return to the menu features.
2) Error Messages
ERR! Card Lost (Press any Key)
If the SD card is removed without stepping thru the saving data section, this error will
appear. Go back to Section 1 to record new data. Note: Data is written to the card as
vehicles are recorded. The data can be recovered if the card is not cleared.
Write Error/Card Error! Try another SD or Format Card.
If the SD card is bad or full, this message will appear. If the card is bad, try re-formatting
it in the data recorder side slot or your personal computer (if equipped to do so, see
NOTE under "formatting card, as listed above). If this does not remove the error, the
card is likely bad and needs to be replaced.
File Name Max Reached, Clear SD Card or Set Custom Name
If you have tried to use the same file name 10 times, this error will display. To resolve
the error, you can do any or all of the following:
• Create a new file name.
• Clear the file name (so the date will be used).
• Format the SD card, erasing the older files.
Adaptive Micro Systems LLC | 7840 North 86th Street | Milwaukee, WI 53224
Settings Menu
Figure 5 – Settings Menu with custom file name set.
Phone (800) 558-7022 | AdaptiveDisplays.com

Advertisement

Table of Contents
loading

Related Products for Adaptive Micro Systems FAST 350

This manual is also suitable for:

Fast 360Fast 375

Table of Contents