Adaptive Micro Systems FAST 350 User Manual page 13

Demonstrates Dimming Feature
Shows "Slow Down" Violator Alert
Shows "Red and Blue" Violator Alert
5 = Scrolls RU2 Fast
6 = Snow Flakes
EX = Exit back to main menu
If the button is pressed during the Demo, the display will allow you to re-select another demo.
Serial Number mode will display seven (7) two (2) digit numbers. This is your software serial
number
Display diagnostic mode will make several patterns on the display used to test the display
integrity. Pressing the program button five (5) times while the display is blank just after The
red and blue test will exit and return to Main Menu.
Auto Intensity Diagnostic Mode will test the ability to auto adjust the brightness of the display
according to the ambient light. A small sensor in the center of the sign reads the outside light
so the processor may determine how bright to make the display. Once in this mode, the
outside light can be varied and will show a number from 0 to 9, with 0 being the lowest and 9
the highest. Putting your hand over the sensor can change this reading.
Turning the Radar Acceleration Filter On and Off
Once this code is put in the display will show either an "On" or "Off". "On" means the filter was
off and will now be turned on. "Off" means the filter was on and will now be turned off. We
recommend the Filter be "On" for most applications.
Turning the No Display Availability On and Off
This feature simply leaves the "ND" mode in or out of the main menu. "On" means the display
availability was off and will now be turned on. "Off" means the Display Availability was on and
will now be turned off. We recommend the Display Availability be "Off" for most applications.
Turning the Set Time Availability On and Off
This feature simply leaves the Set Time mode in or out of the main menu. "On" (or code EN –
Enable) means the Set Time Availability was off and will now be turned on. "Off"
(Code DS – Disable) means the Set time Availability was on and will now be turned off. We
recommend the Set Time Availability be "Off" for most applications. See Section 11 for
detailed operating instructions.
"Optional" Slow Down and Red Blue Violator Features
These features are built in to your radar display but may not be configured to operate
because they are either not appropriate for the application or were not purchased.
These optional Violator Alerts may be viewed by running the demo mode in the "Advanced
Features" section of this manual.
Adaptive Micro Systems LLC | 7840 North 86th Street | Milwaukee, WI 53224
Show Serial Number Mode
Display Diagnostic Mode
Auto Intensity Diagnostic Mode
Phone (800) 558-7022 | AdaptiveDisplays.com