Table of Contents
Advertisement
8
Camera installation
It is assumed that the FLIR A500f/FLIR A700f system will be set up on an existing net-
work and be assigned an IP address from the DHCP server.
Prior to installing the camera, the recommendation is to set it up on an existing network
with a DHCP server, and then use the FLIR IP Config software to detect the camera on
that network. The FLIR IP Config scans for cameras automatically and you can identify
your camera by the MAC address printed on a label on the back of the camera. The cam-
era is then configured from a web browser.
Note Use the latest version of FLIR IP Config.
To install the camera, follow this procedure:
1. On the computer to be used for managing the camera, download FLIR IP Config from
http://support.flir.com, and then install it.
2. Connect the camera to power and the network.
3. The camera is set to use DHCP. On the computer, use FLIR IP Config to identify the
camera on the network, and change the IP settings if necessary.
4. On the computer, do one of the following:
a. Double-click on the camera in FLIR IP Config.
b. Type the IP address of your camera into the address bar of a web browser.
This displays the login view.
5. Log in using the username and password available on the camera calibration certifi-
cate. This displays the web interface of the camera.
6. Use the web interface to configure the camera.
#T810485; r. AA/76994/76994; en-US
11
Advertisement
Table of Contents
