Canopy And Cover Installation; Fan Blade Installation - Home Depot CFN-1053 Instruction Manual

CANOPY AND COVER INSTALLATION

Outlet Box
Ceiling Mounting
Bracket
Step 1. Tuck all the connections neatly into the outlet box.
Step 2. Slide the canopy up to the ceiling mounting bracket and place the key hole slots
over the mounting screws or bolts on the bracket. Rotate the canopy until the
screw or bolt heads lock in place at the narrow section of the key hole.
Step 3. Attach the canopy cover to the bottom of the canopy and screw it into place.

FAN BLADE INSTALLATION

Step 1. Remove the bolts and flat washers pre-installed
on the blade holder underneath the fan motor
assembly.
Step 2. Fit the blades in place on the blade holder.
Step 3. Making sure the blades are straight, secure
them by replacing and retightening the bolts and
washers.
Blades
Bolts and Washers
Bolts and Washers
Bolts
Canopy
Canopy Cover
7