Table of Contents
Advertisement
7
Handling the camera
Note Do not touch the lens surface when you adjust the focus. If this happens, clean
the lens according to the instructions in 24.2 Infrared lens.
7.4.2 Autofocus
To autofocus the camera, push the Autofocus button.
Note You can also assign the autofocus function to one of the programmable buttons.
For more information, see section 7.11 Programmable buttons.
7.4.2.1 Autofocus method
When autofocusing, the camera can use one of the following focus methods:
• Contrast: The focus is based on maximizing the image contrast.
• Laser: The focus is based on a laser distance measurement. The laser is used when
the camera is autofocusing.
The focus method is configured by a setting. Select
(Settings) > Device settings >
Focus > Auto focus and then select Contrast or Laser.
22
#T810253; r. AL/84068/84441; en-US
Advertisement
Table of Contents
