Table of Contents
Advertisement
18
Inspection Route
18.1 General
FLIR Inspection Route is a solution that streamlines thermal inspections and simplifies
data collection and reporting. The solution includes FLIR software and camera support
for preparation, inspection, and post-processing.
With the Inspection Route function, the camera guides the operator along a predefined
route of inspection points, where images and data are collected in a structured manner.
FLIR Inspection Route speeds up post-processing and reporting by ensuring that nothing
is missed and that all inspection results are organized right from the start.
The inspection work flow is defined by an inspection route file, with a high degree of flexi-
bility. It is possible to configure an automated work flow, where the camera automatically
sets the status and steps to the next inspection point when an image is saved. The oper-
ator can also manually select the status, add comments, and add more images.
The inspection route work flow typically involves the following steps:
1. Prepare the inspection route file, using one of the following methods:
• The FLIR Thermal Studio application.
• Your own solution. The FLIR Thermal SDK can be used to build your own export/
import software or to interface your existing asset management system.
• Create a file in the camera.
• Manually edit a file.
2. Add the inspection route file to the camera memory card.
3. Perform the inspection using the camera.
4. Move the results from the camera using the USB cable or the memory card, or up-
load the results to FLIR Ignite.
5. Import the results into FLIR Thermal Studio or your own image management and re-
porting system.
6. Create an inspection route report.
18.1.1 FLIR Inspection Route Solution user manual
The FLIR Inspection Route Solution user manual describes how to configure an inspec-
tion route file, perform an inspection, transfer the inspection results, and create an in-
spection report using a camera with FLIR Inspection Route enabled, the FLIR Thermal
Studio application, and the FLIR Ignite cloud service.
To access the FLIR Inspection Route Solution user manual, go to
http://support.flir.com/resources/route.
18.2 User interface
#T810253; r. AL/84068/84441; en-US
76
Advertisement
Table of Contents
