Page 14
**IMPORTANT** Photo sensor(s) MUST be properly installed (see p.19-20) BEFORE the AUTOSET procedure! **IMPORTANT** OPEN and CLOSE limit switches MUST be properly adjusted (see p.9) BEFORE the AUTOSET procedure! During the AUTOSET stage, it is important to avoid breaking the photocells’...
Page 24
IGEA BT SWING GATE MOTOR 24V – P935070 00002 MAINTENANCE Disconnect the power supply when carrying out any maintenance IGEA PLASTIC COVERS – I098121 operations. IGEA LIMIT/MOTOR BOARD KIT – I098129 • Lubricate the IGEA-BTs of the maneuvering arm regularly. PRIMARY ARM/LEVER PAINTED –...