Removing And Replacing The Cover - HP Net PC 20 Supplementary Manual

WARNING:
Removing the Cover

Removing and Replacing the Cover

Removing and Replacing the Cover
For your safety, never remove the PC's cover without first removing the power
cord from the power outlet, and any connection to a telecommunications
network. Always replace the cover before switching on the PC again.
1 Switch off the display and the PC.
2 Disconnect all power cords and any telecommunications cables.
3 If the PC is being used in its vertical position, remove it from its base and place
it on a flat and stable surface.
4 Using a screwdriver, loosen the three screws securing the chassis cover.
5 Standing at the back of the PC, grasp the cover with both hands. Slide the
cover towards you and pull upwards until it slides off the main chassis.
To unclip the cover completely from the chassis, you may need to gently ease
the sides of the cover away from the chassis.
14
Base
Gently pull the sides of the
cover away from the chassis