HP Net PC 20 Supplementary Manual page 20

Installing a Slim CD-ROM Drive
7 Connect one end of the CD-ROM drive cable onto the CD-ROM drive.
8 Place the front panel chassis slightly in front of the main chassis.
9 Connect the other end of the CD-ROM drive cable to the CD_ROM connector
on the system board (refer to "System Board and Backplane" on page 12).
10 Replace the front panel chassis (refer to "Replacing the Front Panel Chassis"
on page 17).
11 Replace the cover (refer to "Replacing the Cover" on page 15).
20
Pin 1
Red edge