For The Installer - Nibe VPB 500 User's And Installer's Manual

3 For the Installer

General
VPB 500, 750, 1000 is a series water heater, which is
suitable for connection to heat pumps, gas or oil-fired
boilers.
The water tank consists of a steel jacket, with a copper
lining to protect against corrosion. The water heater is
equipped with a copper finned tube (two finned tubes
in VPB 1000).
The water heater is designed and manufactured for a
maximum cut-off pressure of 10 bar. Maximum permit-
ted temperature is 95 °C.
The insulation is polyurethane, which provides excellent
heat insulation. The insulation and grey plastic outer
cladding can be removed to make it easier to move the
water heater through doorways, for example.
The top insulation must be removed to access the lifting
eyes on the VPB 750 and VPB 1000.
VPB 500, 750, 1000 is equipped with an immersion
heater socket and a submerged tube for control of hot
water heating.
VPB 500 can be equipped with an immersion heater and
VPB 750 and VPB 1000 can be equipped with up to two
immersion heaters.
20
Supplied components
VPB 500
Drain valve with plug
Insulation plug
VPB 750
Drain valve with plug
VPB 1000
Drain valve with plug
Copper pipe Ø 28 mm
3 pcs T-pipe connectors
Insulation
Cover discs
Cover discs
Cover discs
3 pcs Angled connectors
Venting nipple
VPB 500, 750, 1000 | GB