Table of Contents
Advertisement
TIMED INTERVALS
The ShutterBoss allows you to control the
amount of time between a series of shots.
Choose an interval that is longer than your
exposure time, from 1 second to 99 hours
59 minutes 59 seconds. If using a flash, be
sure to set an interval that is longer than
your flash recycle time.
1: After connecting the ShutterBoss to
your camera, adjust your camera
settings. Choose your focus mode and
set your exposure.
2: Make certain that the controls on the
ShutterBoss are not locked. If you see
the
displayed, press the
button until the lock icon disappears.
3: Use the arrow button to set the cursor
beneath INTV. Press the left and
SET
right arrows to move the cursor
into place.
4: Press the SET button to change the
Interval setting. Use the left and right
arrows to move between hours, minutes,
and seconds. Use the up and down
arrows to change the time values.
5: Press SET again to accept your selection.
6: Press TIMER START/STOP to begin timer.
/ LOCK
SELF LONG INTV No. BEEP
hours
cursor
minutes
seconds
Advertisement
Table of Contents
