Table of Contents
Advertisement
CARE OF THE SHUTTERBOSS
Protect the ShutterBoss
Do not drop the ShutterBoss. The device
may malfunction if subjected to a strong
shock or vibration.
Keep Dry
The ShutterBoss is not waterproof. Avoid
getting the device wet. Do not expose to
high humidity.
Avoid Sudden Temperature Changes
Sudden changes in temperature, such as
entering or leaving a warm building on a
cold day, can cause damaging condensation
inside the device. Protect the ShutterBoss
by placing it inside a carrying case or a
sealed plastic bag and allowing it to adjust
to temperature changes gradually.
Avoid Magnetic Fields
Strong static charges or electromagnetic
fields generated by equipment such as radio
transmitters can interfere with the device.
A strong external static charge can cause
unusual characters to display on the screen
or may cause the device to malfunction. In
such a situation; turn off the camera,
disconnect the ShutterBoss, remove the
batteries, and then replace them a few
seconds after the display goes out.
Liquid Crystal Displays
The display panel is a liquid crystal display.
At very low temperatures, the display
response my become slower. And at
temperatures higher than 60°C (140°F),
the display may darken. In either case, the
display will return to normal at room
temperature.
Advertisement
Table of Contents
