Connect To The Camera - Vello SHUTTERBOSS User Manual

CONNECT TO THE CAMERA

The ShutterBoss comes in a variety of models
that are compatible with different cameras.
The only difference in ShutterBoss models is
the connector on the end of the cable. Your
ShutterBoss and camera may look different
from those pictured in this guide.
1: Make certain the camera is turned OFF.
2: Make certain the TIMER ACTIVE and
RELEASE indicators are not displayed on
the ShutterBoss.
3: Move the camera's remote cord socket
cover to expose the remote cord jack
and connect the ShutterBoss.
Look for this symbol.
Many camera manufacturers
use it to indicate the jack for
connecting remote devices.