HP Kayak XU04 Features Manual page 4

NOTE
HP MaxiLife® Hardware Monitoring
When the diagnostics tests are complete, one of the following screens will be
displayed:
Diagnostics:
Done
If no errors are detected, you can exit the test session, and the main power
supply will be turned off and the LCD status panel will become blank.
If an error is detected, a short message is displayed on the LCD status panel
describing the type of error (memory, processor) that occurred. For
example, the message
modules could be located. You can then choose whether to continue viewing
the results of the remaining tests.
If the Diags program is run when the system is off, it returns to the Off state
when exiting the test session. On/Off transitions are accompanied with a
'Please wait' screen to allow HP MaxiLife to power on and off correctly.
4
FAIL
Exit
would be displayed if no memory
DIMM FOUND: 0
Diagnostics:
Done OK
Exit