Removing The Power Supply - HP Kayak XU Supplementary Manual

Removing the Power Supply

To remove a faulty power supply, and replace it by a new one, follow these
steps:
1 Disconnect the power cable and remove the cover from the PC
Workstation.
2 Disconnect the fan connection on the upper left of the system board.
Remove the rear fan and airflow guide assembly.
3 Disconnect the power connections from the system board and accessories
(HDD, FDD, CD etc.).
4 Undo the four small screws that hold the power supply rear bezel on the
power supply box.
5 Pivot the power supply away from its rear bezel.
6 Take the power supply box out from the inside of the computer chassis.
To install the new power supply, reverse the steps followed when removing
the old power supply.
Removing the Power Supply
13