Network Features - HP Kayak XU Supplementary Manual

Network Features

All models of HP Kayak PC Workstations are equipped with an
HP 10BT/100TX NightDIRECTOR/100 Ethernet board. This LAN interface
adaptor has a single RJ-45 connector for both 10BT or 100TX connections.
It supports the external start (Remote Power-On) feature. A new feature is
the addition of a light situated on the adaptor, near the connector. The light
has three modes:
This indicates that there is no physical connection between
Off
the board and the network.
The device is engaged in autonegotiation with the network.
Blinking
This indicates that a physical connection is established with
On
the network.
The PC Workstation's Setup program can be used to change the following
Network features:
• Integrated Ethernet interface settings.
• LAN security settings.
• Priority booting of network devices.
Internal LAN connector for
Remote Power On feature
LAN cable connector (RJ-45)
Network Features
15