HP Kayak XM600 User Manual page 58

3 Troubleshooting Your HP PC Workstation
Image Creation and Recovery CD-ROM
Resetting Setup
Values
Completing a Full
Recovery
7 The operating system and drivers will be installed. In this phase, you will
be required to enter the operating system settings and Product ID from
Microsoft's Certificate of Authenticity.
When you have completed the above procedure, and before restarting your
computer, you must change any settings you have modified in the Setup
program back to their original position. Setting incorrect values may cause
system boot failure. Should this occur, press the
the Setup program to load the default values.
The full recovery function will restore the original disk image of your
computer. However, it is recommended installing updated drivers which
are available from the HP web site www.hp.com/go/kayaksupport.
You will also be required to install drivers for any accessory boards that
have been added to the original model. All data files and software
applications that were saved before performing the full recovery will also
need to be restored on the hard disk drive.
Minimal Recovery
To recover the operating system only, follow the instructions indicated
above. In step 3, select the option to perform a minimal recovery.
The minimal recovery will install the Service Pack originally delivered with
your PC. However, it is possible to uninstall it using a shortcut.
If your PC Workstation does not have any SCSI drives, a message displaying
"At least one service failed to start". You can remove the driver through the
Control Panel > SCSI >.
To complete the recovery, you will need to install drivers recommended by
Hewlett-Packard which are available from the HP web site, or other drivers.
Performing a Partial Recovery
Insert the recovery CD-ROM in the CD-ROM drive with the operating
system running. A web browser can be used to navigate through the
CD-ROM to obtain the required driver(s). You can also use Windows
Explorer to browse through the driver directories.
To install a driver, follow the driver's instructions given in the Readme file.
58
key while you are in