Installing And Replacing Hardware Parts In Your Pc Workstation - HP Kayak XM600 User Manual

Hp kayak xm600: users guide
Hide thumbs Also See for Kayak XM600:
Table of Contents

Advertisement

2
Installing and Replacing Hardware
Parts in Your PC Workstation
This chapter provides information about installing accessories and
replacing hardware parts in your PC Workstation.
Processor Fan
Secondary
Hard Disk
Drive tray
Primary Hard Disk
Drive Bay
Depending on the model, the memory module sockets support either:
Two RDRAM modules.
Two SDRAM modules installed in a Memory Expansion Card.
Up to six accessory cards can be
installed:
- One AGP 4X slot (graphics)
- Five 32-bit PCI slots
Primary IDE Connector
Contact your dealer for an up-to-date list of supported devices or check the
HP web site: http://www.hp.com/go/kayak.
Power Supply Unit
HP UltraFlow
Airflow Guide
HP Master Key Lock
Secondary IDE Connector
Front Access Cage
Front Access Drives, for
- 5.25-inch drives
- 3.5-inch 1.44 MB
floppy disk drive
Support for one or two
processors
Floppy Disk Drive Connector

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xm600 - kayak - 128 mb ram

Table of Contents