HP Kayak XA-s02 Install Manual page 15

HP Kayak XA-s 02xx PC Workstation - Installing Accessories In Your HP Minitower PC Workstation
Set the drive on
the tray
Installing a Hard Disk Drive in a Front-Access Shelf
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover (see page 3).
3 Remove the fan connection to the system board (see the illustration
on page 8).
4 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation's case.
5 Slide out the power supply to provide better access to the disk drive
cables (see page 6).
6 Unscrew and remove an unused drive tray.
7 Mount the drive on the tray as shown below.
Installing Mass Storage Devices
Remove the
drive tray
Fix the drive to
the tray
English
15