HP Kayak XA-s02 Install Manual page 13

HP Kayak XA-s 02xx PC Workstation - Installing Accessories In Your HP Minitower PC Workstation
CAUTION
Align the hole in the drive
with the hole in the drive shelf
Installing a Hard Disk Drive in an Internal Shelf
Hard disk drives larger than one inch (1") in height can only be housed
in the lower internal shelf.
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover (see page 3).
3 Remove the fan connection to the system board (see the illustration
on page 8).
4 Press the retaining buttons on each side of the HP UltraFlow airflow
guide and lift it out of the PC Workstation's case.
5 Slide the power supply out to improve access to the internal shelf
(see page 6).
6 Slide the drive into position in the first internal shelf and align the
screw holes in the drive with the four self-retaining screws in the
drive shelf.
Screw hole
Self-retaining
screw
7 Secure the drive with the four self-retaining screws.
Installing Mass Storage Devices
English
13