Using The Lcd For Troubleshooting - HP j6700 Getting Started Manual

Using the LCD for Troubleshooting

If you should receive a failure or warning in your LCD (located on the
front of your workstation), you should record the information and call in
the problem to
representative will need this information to help determine the course of
action to take.
Your computer uses an LCD panel to display firmware/OS progress
codes. The codes, referred to as chassis codes, consist of one of the
mnemonics listed below, followed by a 4-digit hexadecimal number
identifying the code module being executed. The mnemonics and their
meanings are:
A hardware error has been detected
FLT
Hardware being tested
TST
Hardware being initialized
INI
System being shutdown
SHU
A non-optimal or unusual operating condition exists
WRN
Computer is running operating system
RUN
In general, the LCD display has the following format:
MMM
CCCC
FFFFFF
DDDDDDDDDDDDDDDD
Chapter 3
Using the LCD for Troubleshooting
your local HP Support
Three character mnemonic
Four digit hexadecimal code
Six character field replaceable unit
description
Description of the chassis code
Troubleshooting Your System
Representative.
Line 1
Line 2
The
65