HP j6700 Getting Started Manual page 49

6. Double click on the Disk Devices icon.
The following screen message is displayed:
Scanning the system's hardware...
The Disks and File Systems window opens containing a list of
devices installed in this system. From the list of devices, choose the
CD drive you would like to configure as a file system by clicking on
the device to highlight it.
7. Click on Add in the Actions menu. For this example you will select
the item Not Using the Logical Volume Manager. However, you
can select any appropriate item from the Actions menu.
8. Enter the mount directory name (for example, /CD) in the Mount
Directory field of the Add Disk without LVM window.
9. Click on the Modify Defaults... button. In the Modify Defaults
window, select the Read Only item from the Access button menu.
Next, unselect the Create New File System item by clicking on it.
Exit the Modify Defaults window by clicking on the OK button.
10. Click on the OK button in the Add Disk without LVM window. It
will take a short time for the CD to mount. When the Add Disk
without LVM window disappears and CDFS appears in the Use
column of the Disks and File Systems window, the CD is mounted.
Chapter 2
Getting Your System Running
Using Your CD Drive
49