HP Visualize j6000 Install Manual

Desk-Side/Rack-Mount Conversion Process
This document provides information for converting your workstation from a desk-side system to
a rack-mounted system and from a rack-mount system to a desk-side system. You can find more
detailed information in the Technical Reference for the J6000 located at this web site:
www.hp.com/visualize/support/

Desk Side to Rack Mount Conversion

To convert your desk-side system to a rack-mount system, you will need to order the rack-mount
kit (HP Part Number: A5993A) from your local HP Sales Representative. Rack-mount to desk-
side instructions are on the last page.
1. Unplug the workstation, remove from pedestal, remove bezel and vents. See Figure 1.
Figure 1: Desk-side Cover Removal
2. Remove the workstation's plastic cosmetic covers from the workstation. See Figure 2. The
same process is used for both covers.
Figure 2: Plastic-skin Cover Removal (same for both sides)
3. Follow the instructions on the subsequent pages for rack mounting your system:
READ BEFORE INSTALLING
Press snaps and push cover forward, and lift straight up.
!!Do not rotate cover
when removing!!