Miele H 2265-1 B Operating And Installation Instructions page 23

To prevent the risk of accessories slid-
ing off the runners:
- Make sure that they are sitting se-
curely on their runners in between the
stoppers at either end of each runner.
- Always place the rack with the load-
ing surface in the lower position on
the FlexiClip runners.
The FlexiClip runners can support a
maximum load of 15 kg.
Because the FlexiClip runners sit on
the top rail of the side runners, the gap
between the level the FlexiClip runners
are on and the one above is smaller
than if, for instance, racks were fitted
on each level. Cooking results will be
affected if the gap is too small.
You can use more than one baking tray,
universal tray or rack at a time.
 Place the baking tray, universal tray
or rack on the FlexiClip runners.
 Leave at least one shelf level free
between the FlexiClip runner and any
baking tray, universal tray or rack
above it.
You can use the universal tray together
with the rack on the FlexiClip runners.
 Place the universal tray together with
the rack on the FlexiClip runners. The
rack will automatically slide between
the rails of the shelf level above the
FlexiClip runners.
 Leave at least one shelf level free
between the FlexiClip runner and any
baking tray, universal tray or rack
above it.
Features
23