7. For the initial configuration of the device parameters using the web-interface, make sure that the device
responds to the ping command at its IP address.
8. In order to configure the device, open the web-interface of the device using this address
the help of a browser (it is recommendable to use the latest version of Google Chrome). In order to authorize, use:
•
Login: visor
•
Password: ping
Further configuration of the device is carried out in the web-interface of the device.
Attention! The description of the web-interface can be found in a separate document
the number of a firmware version of the device, which description you use.
[ENG] NetPing IO R401, User Guide -[ENG] [R401] 4. Installation and Connection
http://192.168.0.100
DKSF 561.X IU,
[ENG] [R401] 4. Installation and Connection
with
where X —
–