Advertisement
Quick Links
HO0163A0TX/HO0163B0TX
Andress Adjustable Height Desk
Assembly Instructions
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
service@seidal.com
www.seifurniturestore.com
Please do not load more than 30 lb. when desktop is fully raised.
Page 1
Advertisement
Related Manuals for Southern Enterprises Andress HO0163A0TX
Summary of Contents for Southern Enterprises Andress HO0163A0TX
- Page 1 HO0163A0TX/HO0163B0TX Andress Adjustable Height Desk Assembly Instructions For assistance with assembly contact: Southern Enterprises Inc. Customer Service 1-800-633-5096 service@seidal.com www.seifurniturestore.com Please do not load more than 30 lb. when desktop is fully raised. Page 1...
-
Page 2: Parts List
Andress Adjustable Height Desk Parts List Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface like carpet or a blanket. Check that you have all parts indicated. Call customer service if any hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. - Page 3 Quantity Quantity of 2 of 4 Shelf Rail Adjustable Leg Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. For replacement parts or questions, please call SEI Avoid rubbing or scratching the surface with rough or customer service at 1-800-633-5096. abrasive objects.
- Page 4 Andress Adjustable Height Desk Assembly Instructions Attach Adjustable Levels (D) to Adjustable Legs (8) by hand. Figure 1 Attach Adjustable Legs (8) to Side Legs (1) with Bolts (A) . Tighten Bolts (A) with Allen Wrench (C). Figure 2 Page 3...
- Page 5 Attach Shelf Rail (7) to Side Legs (Right) (3) with Bolts (A). Tighten Bolts (A) with Allen Wrench (C). Figure 3 Line up Side Legs (2/3) and Rails (5/6). Figure 4 Page 4...
- Page 6 Connect Rails to Side Leg with Bolts (A). Tighten Bolts (A) with Allen Wrench (C). Figure 5 Attach Shelf (4) to pre-assembled unit from Figure 5 with Bolts (B). Tighten Bolts (B) with Allen Wrench (C). Figure 6 Page 5...
- Page 7 Attach Brackets (G) to the Desktop (1) with Screws (H). Tighten Screws (H) with Phillips screwdriver (not included). Figure 7 Attach pre-assembled unit from figure 7 to Desktop (1) with Bolts (B). Tighten Bolts (B) with Allen Wrench (C). Figure 8 Page 6...
- Page 8 Mark two desired locations on the wall and drill two 3/16" holes. Insert plastic Anchors (F) into the holes on wall, tap lightly with hammer (not included) as needed. Figure 8 Attach Brackets (G) to the wall using Screws (E). Tighten Screws (E) using Philips screwdriver.
- Page 9 Move this item close to the wall and tie brackets (H) together with Plastic Straps (I). Note: Anti-tipping hardware must be used for this product to avoid tipping and injury. Figure 10 Now your Andress Adjustable Height Desk is ready to use! To open top, simply lift up.
- Page 10 If the height is not level, adjust the foot pad by hand. Figure 12 Change the height by adjusting the adjustable legs. Figure 13 Page 9...
-
Page 11: Parts Replacement Form
90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central time if you have product issues or email us at service@seidal.com. Please ask for customer service representative for issues involving damages or replacement parts.
Need help?
Do you have a question about the Andress HO0163A0TX and is the answer not in the manual?
Questions and answers