Front Bezel - Compaq AP500 Maintenance And Service Manual

3-6 Removal and Replacement Procedures

Front Bezel

To remove the front bezel:
1. Perform the service preparations shown on page 3-2.
2. Remove the side access panel.
Push the front bezel release latches 1 and remove the bezel 2.
3.
Figure 3-5. Removing the front bezel
To replace the front bezel:
1. Line up the hinges and release latches with the appropriate slots on the front of the
chassis.
2. Press the bezel in to secure the release latches.
ACT
COMP
1
2