Advertisement
Turn the arrow on adjustment handle (A43) toward
the left and then insert adjustment handle (A43)
into axle (A42)
ASSEMBLY OF THE FRONT STABILIZER
First, remove bolts(C3), curved washers(C4) and nuts(C5) from front
stabilizer(C). Attach the front stabilizer(C) to the main frame(A) using
bolts(C3), arc washers(C4)& nuts(C5).** After you finish assembly
(Figure 1 & Figure 2), if the machine does not sit level, you
can use the adjustable end caps (B2) to compensate for
uneven surfaces.
ASSEMBLY FOR BACK PAD TUBE
First remove bolts (A60) & washers (J7) from main
frame. Attach the back pad support tube (G) to
the main frame (A) using bolts (A60)
& washers (J7).
ASSEMBLY OF THE REAR STABILIZER
Attach the rear stabilizer (B) to the
main frame (A) with bolts (B3), curved
washers (B4) and nuts (B5).
-2-
A43
A42
G
A60
J7
Advertisement
