Auto Download - HP Compaq t1000 Supplementary Manual
Windows-based terminal
Hide thumbs
Also See for Compaq t1000:
- Supplementary manual (320 pages) ,
- Reference manual (100 pages) ,
- User manual (62 pages)
Table of Contents
Advertisement
3. Power-up the terminal to initiate the download.
The Firmware Upgrade dialog box appears, showing that the download is in
progress. When the download is complete, disconnect the parallel cable. The
Setup Wizard will appear.
Note
If the download dialog box remains on the screen
longer than 1 minute, press the Enter key. A prompt to
repeat or quit the operation appears. If the download
fails, quit the procedure, check all cables and
connections, then repeat from Step 2.
Auto Download
Use the following instructions to perform an auto download:
1. Log on to the root of the drive where the installation batch file resides (usually
D:).
2. Type install at the DOS prompt, then press Enter. The Download Utility dialog
box appears and the install program prompts you through the download
procedures.
3. When you are finished with your download, disconnect the LapLink cable and
reconnect the peripheral cables.
4. Power-up the terminal and reconfigure its communications and options settings.
5. Check the About dialog box to verify the download revision.
145
Advertisement
Table of Contents
