T1000 Terminal Installation; Locating The Terminal; Connecting The Terminal - HP Compaq t1000 Supplementary Manual

2

T1000 Terminal Installation

This section discusses the procedures for installing the T1000 modular terminal.
This terminal can be freestanding or, optionally, mounted on a wall. It can instead
be permanently mounted on a desktop, if desired. The following paragraphs
describe how to connect and set up the terminal in all three configurations.

Locating the Terminal

Position the terminal on a clean, horizontal surface that is free from vibration and
out of direct sunlight. Refer to "Windows-based Terminal Specifications" for
environmental specifications.

Connecting the Terminal

Make all connections to the back panel before connecting the terminal to power. A
shroud (described in "Shroud Attachment") can be installed after the cables are
connected and the terminal is mounted in place. Figure 2-1 shows the terminal's
back panel connectors.