Server Location Properties Sheet - HP Compaq t1000 Supplementary Manual

Figure 7-3 Server Location Properties Sheet
The following table describes each of the functions of this sheet.
Table 7-3 Server Location Properties Sheet
Function
Add
Delete
Move Up
Move Down
Network Protocol:
TCP/IP
Default List
Server Group
Rename Group
Description
Click on this command button to add a server to the
list.
Use this button to delete the name of a server from the
list.
Click on this button to move the name of a server up in
the list.
Click on this button to move a server down in the list.
Note
Delete, Move Up, and Move Down are not
activated unless multiple ICA servers are listed
in Network Protocol: TCP/IP. See the next
table entry.
Use this list to select an ICA server. The default is
(Auto-Locate).
Use this button to recall the previous server list.
Use this scroll list to select the server group from which
the list is built.
Use this command button to rename a server group.
41