Using The Security Settings Dialog Box; Tcp/Ip Settings Dialog Box - HP Compaq t1000 Supplementary Manual

70
Connection Configuration
The following table discusses the functions in this dialog box.
Table 12-1 TCP/IP Settings Dialog Box
Function
Use Software Compression
Use IP Header Compression
Use SLIP
Use Assigned IP Address
Use Server-Assigned IP Addresses
Use Default Gateway on Remote
Network

Using the Security Settings Dialog Box

Click on the Security... command button in the second dialog box of the
Dial-Up Configuration Wizard to configure dial-up security. When this command
button is pressed, the Security Settings dialog box displays. Figure 12-2 shows
this dialog box.
Description
Click on this check box to enable this
function. By default, this function is
activated and enabled.
Click on this check box to enable Use
IP Header Compression. By default,
this function is activated and enabled.
Click on this check box to enable this
function. SLIP is Serial Line Internet
Protocol. By default, this function is not
enabled.
Click here to activate this text box. By
default, the text entry box is not
activated.
Click here to disable server-assigned
addresses and to activate the text
entry boxes for typing-in addresses.
By default, the text entry box is not
activated.
Click on this check box to enable this
function. By default, the function is
activated and enabled.