Using The Modem Settings Dialog Box; Modem Settings Dialog Box - HP Compaq t1000 Supplementary Manual

90
Connection Configuration
Table 15-1 TCP/IP Telnet Configuration, Continued
Function
Force Negotiation
Break Settings

Using the Modem Settings Dialog Box

The Configure command button invokes the Modem Settings dialog box.
Figure 15-2 shows this dialog box.
Figure 15-2 Modem Settings Dialog Box
The following table discusses the available modem settings.
Table 15-2 Modem Settings Dialog Box
Function
Configuration Name
Select a Modem
Configure
Area Code
Telephone Number
Country Code
Description
Use the Binary and EOR drop-down scroll lists to
configure negotiation parameters. The default for
Binary is No and the default for EOR is No.
Use the TM with Break and CR with Break check
boxes to configure break settings.
Description
Enter the name of your configuration.
Select a modem from the drop-down scroll list.
See "Using the Dialing Properties and Configure
Command Button" in Connection Configuration for
information about this function.
Enter the area code in this text box.
Enter the telephone number in this text box.
Enter the country code in this text box.