Table of Contents
Advertisement
a. Loosen clamping spring and remove it.
b. Insert the chisel to the bottom and tighten.
Attention!
Chisel should be well secured and tightened.
Check for gaps before starting work.
Always check the chisel for injuries that hurt at work. Working with non-compliant supplies for the
unit can damage it and cause injury to an employee.
3. Starting and stopping.
Once you have inserted and tightened chisel, grasp the unit with full palm on the pistol grip.
To turn it on, press the power button (Figure 1). While the button is pressed, the machine works Ill.
Adjust the speed on impact - for increased knob on the handle clockwise and vice versa for the
reduction.
4. Maintenance and cleaning
To extend the life of the appliance and to ensure a peaceful work, you must clean the intake and
lubricate moving parts after use.
13
Advertisement
Table of Contents
