Thermo Scientific Smart-Vue Installation Manual page 24

Thermo Fisher Scientific
5. Enter a name (maximum of 8 characters) for the receiver in the
Site/receiver name field.
6. From the Receiver COM port number pick-list, select the virtual
COM port you created in CPR Manager (e.g., COM19).
7. Enter the TCP port in the TCP port for Smart-Vue Server field.
Note Make sure no other receivers are currently configured to use the TCP
port indicated in the TCP port for Smart-Vue Server field (the default is
1091).
8. Click on OK ==> Close to save your settings.
Configuring network receivers in Smart-Vue Client
Smart-Vue Network Receiver (TCP/IP) Installation Guide
21