Installation Procedure; Before You Begin - Thermo Scientific Smart-Vue Installation Manual

Installation procedure

Installation
procedure

Before you begin

Smart-Vue Network Receiver (TCP/IP) Installation Guide
8
The procedure described here assumes you are installing your new receiver
into an existing network in which the Smart-Vue Server/Smart-Vue Client
software and at least one Smart-Vue end-point module are already up and
running. If you need more information, please refer to the Smart-Vue
Software User Manual for complete details for using the software and
configuring your products.
Note This installation requires knowledge of your organization's IP classes
and addresses, particularly static IP addresses. If you do not have access to
this information, we highly recommend that you work with your network
administrator before starting this installation.
Temporarily disable the firewall on your computer
For smooth installation, we recommend that you temporarily disable your
firewall during installation. (A firewall is a security system that acts as a
protective shield between your network and the outside world.)
This must be done by a user with Administrator privileges. Contact your
system administrator for help if you are unsure or if you do not have
Administrator rights.
Disabling your firewall is a temporary solution just for installation. Refer to
the Appendix - Configuring your firewall on page 23 for the long-term
solution, which involves configuring firewall ports, or contact your system
administrator for assistance.
Thermo Fisher Scientific