System Requirements; Where To Find More Information - Thermo Scientific Smart-Vue Installation Manual

System requirements

Where to find more
information
Thermo Fisher Scientific
• Thermo Fisher Scientific recommends that Installation and Operational
Qualifications (IQ/OQ) be performed before initial use.
• For timely notification of an emergency/alarm, it is critical to establish
primary, secondary and tertiary call-out procedures with escalation so
contact is not dependent on reaching one individual. Ideally, ultimate
contact is with a security department or company with 24/7
monitoring.
Please see the Thermo Scientific Smart-Vue Software User Manual for an
in-depth description of Smart-Vue end-point module configuration, alerts,
notification, data management and general system features.
Do not install Smart-Vue Server on a laptop computer.
• PC running the following Microsoft Windows 32 bit systems:
• Operating systems supported:
• Windows 2000 SP4
• XP Pro SP2 or later
• Vista Home, Business, Ultimate, and Enterprise,
• Windows Server 2000, 2003 and 2008
• 10/100 Mbit Ethernet network (TCP/IP)
• CD-ROM drive to install the Lantronix drivers and port configuration
software
• Internet browser for accessing the receiver's on-board settings
• Administrator rights for the computer on which you are installing the
Lantronix drivers for the network receiver.
• UPS sized appropriately for your power and system requirements. Make
sure you follow the manufacturer's maintenance recommendations.
This guide leads you through basic installation steps to get you started with
your product. For more details, please see the Thermo Scientific Smart-Vue
Software User Manual. You may click on Help ==> User manual to open it
directly from within the Smart-Vue Client software.
Smart-Vue Network Receiver (TCP/IP) Installation Guide
Requirements and recommendations
7